Fabric Banner (9.5oz Blockout)

Banners

Fabric Banner (9.5oz Blockout)

A 3-ply, 9.5oz polyester fabric banner with a blockout layer inside, dye sublimated in full colour with a low-sheen finish that cuts glare, ideal for photo backdrops and front-lit displays.

View Options & Request a Quote (opens our product catalog in a new tab)

Choose your options and submit your quote request in our product catalog.

About Fabric Banner (9.5oz Blockout)

This fabric banner is made of three layers of polyester: a white front, a white back and a blockout layer between them. That middle layer stops light behind the banner from showing through and washing out your graphic.

We dye sublimate your design into the fabric for rich colour. The low-sheen surface keeps flash and stage lights from bouncing back, which is why it is a favourite for photo backdrops and step-and-repeats.

It is single sided and custom sized up to 8′ x 150′. Finish it with hems, brass grommets, 2″ or 3″ pole pockets, 1″ or 2″ sewn-on Velcro, or clean heat-knife cut edges with no hem.

Common uses

Photo backdrops

Low-glare step-and-repeats for red carpets, galas and press walls.

Stage and event backdrops

Front-lit graphics that stay clean even with light behind them.

Trade show walls

Fabric graphics for frames and booth walls.

Retail and lobby displays

A soft, upscale look for indoor brand graphics.

Why customers choose it

  • Internal blockout layer stops backlight showing through
  • Low-sheen surface reduces flash and glare
  • Full-colour dye sublimation on 3-ply polyester
  • Custom sizes up to 8′ x 150′
  • Hems, grommets, pole pockets, Velcro or flush cut edges
  • Proof before print, so you see it before we make it

Materials, sizes and finishing

MaterialDye sublimated 9.5oz 3-ply blockout polyester fabric
Print sidesSingle sided only
SizesCustom width and height, up to 8′ x 150′ (no oversized prints)
Hems and grommetsHem on all sides (white or black thread to match the graphic) or no hem with heat-knife cut edges; #2 brass grommets every 2′ (all sides, top and bottom, or left and right), 4 corners only, custom or none
Pole pockets2″ or 3″, top only or top and bottom, or custom
Velcro1″ or 2″ sewn-on Velcro on all sides
ArtworkJPEG or single-page PDF, CMYK, 150 dpi at full size, up to 300MB, no crop marks or bleeds.

Specifications come from our product catalog. Choose exact sizes and options there; if you need something not listed, call us.

Questions

Why choose blockout fabric?

If there is a light, window or bright wall behind your banner, the blockout layer keeps it from showing through. The low sheen also keeps camera flash from creating hot spots.

Can it be printed on both sides?

No. This fabric is single sided only.

What edge finish should I choose?

Grommets suit hanging with hooks or zip ties, pole pockets slide over a rod, and Velcro attaches to frames. Heat-knife cut edges give a clean, hemless look.

Ready to choose your options?

View Options & Request a Quote (opens our product catalog in a new tab)

Choose your options and submit your quote request in our product catalog.

Not sure which product is right? Ask a real person.

Call (720) 903-3522