20ft Tent Walls

Event Tents

20ft Tent Walls

Custom printed full and half walls for our 10' x 20' event tent. Choose long side backdrops, short side full walls or half walls to complete your booth.

View Options & Request a Quote (opens our product catalog in a new tab)

Choose your options and submit your quote request in our product catalog.

About 20ft Tent Walls

Our 20ft Tent Walls complete a 10×20 event tent with more printed space. Every wall is dye-sub printed in full colour on 6oz weatherproof tent fabric.

Full walls come in a 228″ long side version and a 113″ short side version. They hang from velcro loops just under the canopy and reach to about 4 inches above the ground, giving you a huge backdrop that can also help block the wind. The two sizes are not interchangeable.

Half walls fit the short sides only, up to two per tent. They mount on a telescopic aluminum pole with two hex clamps, using a top pole pocket and side velcro loops, and can be printed on one or both sides.

Common uses

Big back wall

A 228″ wide backdrop for large graphics behind your booth.

Enclosed booth

Close in the sides for a branded room at outdoor events.

Entry points

Half walls on the ends to direct visitors where you want them.

Sponsor recognition

Room for partner logos at tournaments and festivals.

Why customers choose it

  • Full-colour dye-sub print on weatherproof tent fabric
  • Long side and short side full walls
  • Half walls can be single or double sided
  • Full walls attach with velcro loops, no extra hardware
  • Proof before print, so you see it before we make it

Materials, sizes and finishing

Material6oz tent fabric (600×600 denier), dye-sublimation printed, waterproof coated, scratch and weather resistant
Print sidesFull walls single sided only; half walls single or double sided
SizesLong side full wall 228″ x 78″; short side full wall 113″ x 78″; half wall 113″ x 39″
AttachmentSewn-in velcro loops to the upper frame and legs; half walls also have a top pole pocket
HardwareFull walls need none. Half wall hardware (optional): one telescopic aluminum pole and 2 hex clamps
OptionsWhite or black reinforced strip; hardware yes or no
UseFits our 20ft (10×20) event tent. Half walls: short sides only, maximum of 2
ArtworkJPEG or single-page PDF, CMYK, 150 dpi at full size, up to 300MB; double-sided pieces upload as two files. Templates available, or our designers can help.

Specifications come from our product catalog. Choose exact sizes and options there; if you need something not listed, call us.

Questions

Are half walls available for the long side?

No. Half walls and hardware are made for the 10′ short sides only, with up to two per tent.

Can I mix full and half walls?

Yes. A common setup is a long side full wall at the back with half walls on the short ends.

Do full walls need hardware?

No. They attach to the frame with sewn-in velcro loops.

Ready to choose your options?

View Options & Request a Quote (opens our product catalog in a new tab)

Choose your options and submit your quote request in our product catalog.

Not sure which product is right? Ask a real person.

Call (720) 903-3522