10ft Tent Walls

Event Tents

10ft Tent Walls

Custom printed full and half walls for our 10ft event tent. Add a branded backdrop, a partial side or both to finish your tent and steer foot traffic.

View Options & Request a Quote (opens our product catalog in a new tab)

Choose your options and submit your quote request in our product catalog.

About 10ft Tent Walls

Walls turn a tent into a complete booth. Our 10ft Tent Walls are printed in full colour on the same 6oz weatherproof tent fabric as our canopies and fit our 10×10 aluminum hex frame.

Full walls hang from velcro loops just under the canopy and drop to about 4 inches above the ground. They make a strong backdrop and can also block some wind outdoors. Full walls print on one side.

Half walls run 39″ tall with a top pole pocket and velcro loops at the sides, and they can be single or double sided. They mount on half wall hardware, a telescopic aluminum pole with two hex clamps. Use one to four to frame your entry point and add more room for your message.

Common uses

Booth backdrops

A full back wall for logos, menus or product shots behind your team.

Guiding traffic

Half walls that open the tent where you want visitors to walk in.

Windy outdoor days

Full walls that help break the wind at markets and races.

Sponsor space

Extra printed area for partner logos at tournaments and festivals.

Why customers choose it

  • Full-colour dye-sub print on weatherproof tent fabric
  • Full walls attach with sewn-in velcro loops, no extra hardware
  • Half walls can be single or double sided
  • Mix full and half walls for a modular setup
  • Proof before print, so you see it before we make it

Materials, sizes and finishing

Material6oz tent fabric (600×600 denier), dye-sublimation printed, waterproof coated, scratch and weather resistant
Print sidesFull walls single sided only; half walls single or double sided
SizesFull wall 113″ x 78″; half wall 113″ x 39″
AttachmentSewn-in velcro loops to the upper frame and legs; half walls also have a top pole pocket
HardwareFull walls need none. Half wall hardware (optional): one telescopic aluminum pole and 2 hex clamps
OptionsWhite or black reinforced strip; hardware yes or no
UseFits our 10ft (10×10) event tent; indoor and outdoor
ArtworkJPEG or single-page PDF, CMYK, 150 dpi at full size, up to 300MB; double-sided pieces upload as two files. Templates available, or our designers can help.

Specifications come from our product catalog. Choose exact sizes and options there; if you need something not listed, call us.

Questions

Do these fit any 10×10 tent?

They are made for our 10ft aluminum hex event tent frame. The half wall clamps are sized to fit that hardware.

Do I need hardware for a full wall?

No. Full walls attach straight to the tent frame with velcro loops. Half walls need the half wall pole and clamps.

Can a full wall be double sided?

Full walls are single sided only. If you want print on both faces, choose double-sided half walls.

Ready to choose your options?

View Options & Request a Quote (opens our product catalog in a new tab)

Choose your options and submit your quote request in our product catalog.

Not sure which product is right? Ask a real person.

Call (720) 903-3522